• Drawing the users' paddles and ball

1. Update the Wiimote state. The UpdateWiimoteState method of the Wiimote class will get both the button and acceleration values of the Wiimote, so it is the perfect choice for our use here. It is also possible to get either one separately if that is needed.

1. Redraw and Pause. This is one of the most important pieces of any program like this. You need to make sure that you have a pause(xx) at the end of every loop that uses the Wiimote or EG111-H functions. MATLAB will not execute any callback functions until it reaches a pause(xx). If the pause is omitted you will begin to experience unusual behavior from the Wiimote class.

• if the paddle will end up inside the bounds * then move the paddle as normal
• if the paddle will end up above the upper bound * then move the paddle the rest of the distance to the boundry and no further
• if the paddle will end up below the lower bound * then move the paddle the rest of the distance to the boundry and no further

WiiLab Example Code - Pong

1. Update the Wiimote state. The UpdateWiimoteState method of the Wiimote class will get both the button and acceleration values of the Wiimote so it is the perfect choice for our use here. It is also possible to get either one seperately if that is needed.
2. Move the paddles based on the Y-axis acceleration of each Wiimote. (For details on how this is done see below)
3. Move the ball. (For details on how this is done see below)
4. Check if someone has won.
5. Redraw and Pause. This is one of the most important pieces of any program like this. You need to make sure that you have a Pause(xx) at the end of every loop that uses the Wiimote or EG111-H functions. Matlab will not execute any callback functions until it reaches a Pause(xx). If the pause is ommited you will begin to experience unusual behaivor from the Wiimote class.

% Get the wiimote status wiimote1.UpdateWiimoteState(); wiimote2.UpdateWiimoteState();

% Move the paddle with Accel mapped directly to velocity % player 1 %-------------------------------------------------------------- %-------------------------------------------------------------- % player 2 %-------------------------------------------------------------- %--------------------------------------------------------------

% Move the ball %--------------------------------------------------------------- %--------------------------------------------------------------- % make a new ball if needed

% check if someone has won if (p1_score == 11) winner = 1; gameover = true; elseif (p2_score == 11) winner = 2; gameover = true; end

% Redraw the screen and pause redraw(); pause(0.01);

end % while

Move Paddle

if( ((y_p1 + paddleSize_y) + vely1 < 300) && ((y_p1 - paddleSize_y) + vely1 > 0) ) yMove(player1_Paddle, vely1); elseif ( ((y_p1 + paddleSize_y) + vely1 > 300) && ((300 - (y_p1 + paddleSize_y)) > 0) ) yMove(player1_Paddle, (300 - (y_p1 + paddleSize_y))); elseif ( ((y_p1 - paddleSize_y) + vely1 < 0) && (0 - (y_p1 - paddleSize_y) < 0) ) yMove(player1_Paddle, (0 - (y_p1 - paddleSize_y))); end %--------------------------------------------------------------

% Move the paddle with Accel mapped directly to velocity % player 2 %-------------------------------------------------------------- vely2 = -1 * wiimote2.Accel(2) * velDamping; [x_p2 y_p2] = getCenter(player2_Paddle);

if( ((y_p2 + paddleSize_y) + vely2 < 300) && ((y_p2 - paddleSize_y) + vely2 > 0) ) yMove(player2_Paddle, vely2); elseif ( ((y_p2 + paddleSize_y) + vely2 > 300) && ((300 - (y_p2 + paddleSize_y)) > 0) ) yMove(player2_Paddle, (300 - (y_p2 + paddleSize_y))); elseif ( ((y_p2 - paddleSize_y) + vely2 < 0) && (0 - (y_p2 - paddleSize_y) < 0) ) yMove(player2_Paddle, (0 - (y_p2 - paddleSize_y))); end %--------------------------------------------------------------

Move Ball

% if it is against the upper or lower wall switch its ydir if( ((y_ball + ballSize) > 300) || ((y_ball - ballSize) < 0) ) ydir = -1 * ydir; end

% If the ball is behind player 1's line if( ((x_ball + ballSize) > 290) ) if( ((y_ball - ballSize) < y_p2 + paddleSize_y) ... && ((y_ball + ballSize) > y_p2 - paddleSize_y) )

xdir = -1 * xdir;

ydir = vely2 * (.5 * velDamping);

else p1_score = p1_score + 1; set(p1_score_disp, 'string', p1_score); needNewBall = true; end

% If the ball is behind player 2's line elseif( ((x_ball - ballSize) < 10) ) if( ((y_ball - ballSize) < y_p1 + paddleSize_y) ... && ((y_ball + ballSize) > y_p1 - paddleSize_y) )

xdir = -1 * xdir;

ydir = vely1 * (.5 * velDamping);

else p2_score = p2_score + 1; set(p2_score_disp, 'string', p2_score); needNewBall = true; end end

% Actually move the ball xMove(ball, xdir); yMove(ball, ydir); %--------------------------------------------------------------

WiiLab Example Code - BouncingBall

Note: MATLAB R2007a or greater is required for this code to run correctly.

Annotations

This program is a Pong simulator that allows two players to play a game of Pong using the Wiimotes Y-axis acceleration to move the paddles. The game requires two Wiimotes to play. There is no one-player version yet, though I hope to finish and upload it soon.

One thing of note is that this demo game is different from the other demos because it uses the Wiimote class directly instead of through the global functions. This is because you can only use one Wiimote when using the global functions.

Program Breakdown

The program is fairly large so I have broken it down into its vital blocks to describe each in detail. The complete file is attached at the bottom of the page.

Initialization

The program starts by connecting to the Wiimotes and making sure there are enough to play. I create two instances of the Wiimote class, wiimote1 and wiimote2, and try to connect to two Wiimotes. If we were unable to connect to one of the Wiimotes, for any reason, then we disconnect the Wiimotes and run the DisconnectAllWiimotes? method to clear the connected Wiimotes variables of the WiimoteCOM? in case some Wiimotes were incorrectly disconnected from earlier applications and thier connection is still believed to be active.

% Create an instance of the wiimote and connect it
wiimote1 = Wiimote();
wiimote2 = Wiimote();
wiimote1.Connect();
wiimote2.Connect();

if(wiimote1.isConnected <= 0 || wiimote2.isConnected <= 0)
    % There were not enough available Wiimotes
    % Disconnect all wiimotes to initialize new wiimotes
    wiimote1.Disconnect();
    wiimote2.Disconnect();
    wiimote1.DisconnectAllWiimotes();
   
    % Attempt to reconnect
    wiimote1.Connect();
    wiimote2.Connect();
end

After the Wiimotes are connected we are going to initialize the game window. This involves the following:

• Creating the main window
• Setting the background color to Black
• Drawing the Center Line (an array of rectangles)
• Drawing the initial player scores
• Drawing the users paddles and ball

% Initialize Window
% -----------------------------------------------------------------
% Init window
initializeWindow(0);

% set background color
set(gca,'Color','black');

% Draw Center Line
for i = 0 : 19
    drawRectangle(149, (5 + i*15), 2, 5, [.7 .7 .7]);    
end

% Draw score
p1_score = 0;
p2_score = 0;

p1_score_disp = writeText(80,280,'0');
set(    p1_score_disp, 'FontWeight', 'bold', ...
        'FontSize', 64, 'FontName', 'OCR A Extended', ...
        'Color', [.7 .7 .7]);

p2_score_disp = writeText(180,280,'0');
set(    p2_score_disp, 'FontWeight', 'bold', ...
            'FontSize', 64, 'FontName', 'OCR A Extended', ...
            'Color', [.7 .7 .7]);

% Draw user paddles
player1_Paddle = drawRectangle(5, 135, paddleSize_x * 2, paddleSize_y * 2, 'white');
player2_Paddle = drawRectangle(290, 135, paddleSize_x * 2, paddleSize_y * 2, 'white');

% Draw ball
ball = drawRectangle((150 - ballSize), (150 - ballSize), (ballSize * 2), (ballSize * 2), 'white');
needNewBall = false;
% Initialize ball speed
ydir = (rand * 2) - 1; 
xdir = ballSpeed;   
% -----------------------------------------------------------------

Main Loop

The main loop of the game is

Move Paddle

Move Ball

Raw Source Code

The source code is also available as a .m file download at the bottom of the page.

% Pong - Recreation using the Nintendo Wiimote as a controller
%
% Author: Jordan Brindza, University of Notre Dame

% add the path containing simple graphics funcions
addpath .\EG111-H
% add the path containing the wiimote functions
addpath .\WiimoteFunctions

% Constants
velDamping = 1;     % # <=1 to scale the incoming accel to vel
ballSize = 2;       % # indicating the ball size (1/2 the actual size)
paddleSize_x = 2.5; % # indicating the x paddle size (1/2 of the actual size)
paddleSize_y = 10;  % # indicating the y paddle size (1/2 of the actual size)
ballSpeed = 2;      % # indicating the total speed of the ball
gameover = false;

% Disconnect all wiimotes to initialize new wiimotes
wiimote = Wiimote();
wiimote.DisconnectAllWiimotes();

% Create an instance of the wiimote and connect it
wiimote1 = Wiimote();
wiimote2 = Wiimote();
wiimote1.Connect();
wiimote2.Connect();


% If two wiimotes were found
if(wiimote1.isConnected > 0 && wiimote2.isConnected > 0)
     
    % Initialize Window
    % -----------------------------------------------------------------
    % Init window
    initializeWindow(0);

    
    % set background color
    set(gca,'Color','black');

    % Draw Center Line
    for i = 0 : 19
        drawRectangle(149, (5 + i*15), 2, 5, [.7 .7 .7]);    
    end

    % Draw score
    p1_score = 0;
    p2_score = 0;
    p1_score_disp = writeText(80,280,'0');
    set(    p1_score_disp, 'FontWeight', 'bold', ...
            'FontSize', 64, 'FontName', 'OCR A Extended', ...
            'Color', [.7 .7 .7]);
    p2_score_disp = writeText(180,280,'0');
    set(    p2_score_disp, 'FontWeight', 'bold', ...
            'FontSize', 64, 'FontName', 'OCR A Extended', ...
            'Color', [.7 .7 .7]);

    % Draw user paddles
    player1_Paddle = drawRectangle(5, 135, paddleSize_x * 2, paddleSize_y * 2, 'white');
    player2_Paddle = drawRectangle(290, 135, paddleSize_x * 2, paddleSize_y * 2, 'white');

    % Draw ball
    ball = drawRectangle((150 - ballSize), (150 - ballSize), (ballSize * 2), (ballSize * 2), 'white');
    needNewBall = false;
    % Initialize ball speed
    ydir = (rand * 2) - 1; 
    xdir = ballSpeed;   
    % -----------------------------------------------------------------


    % While "Home" is not pressed
    wiimote1.UpdateWiimoteState();
    wiimote2.UpdateWiimoteState();

    while (~wiimote1.Buttons(9) && ~gameover)

        % Get the wiimote status
        wiimote1.UpdateWiimoteState();
        wiimote2.UpdateWiimoteState();

        % Move the paddle with Accel mapped directly to velocity
        % player 1
        %--------------------------------------------------------------   
        vely1 = -1 * wiimote1.Accel(2) * velDamping;
        [x_p1 y_p1] = getCenter(player1_Paddle);

        if( ((y_p1 + paddleSize_y) + vely1 < 300) && ((y_p1 - paddleSize_y) + vely1 > 0) ) 
            yMove(player1_Paddle, vely1);    
        elseif ( ((y_p1 + paddleSize_y) + vely1 > 300) && ((300 - (y_p1 + paddleSize_y)) > 0) )
            yMove(player1_Paddle, (300 - (y_p1 + paddleSize_y)));   
        elseif ( ((y_p1 - paddleSize_y) + vely1 < 0) && (0 - (y_p1 - paddleSize_y) < 0) )
            yMove(player1_Paddle, (0 - (y_p1 - paddleSize_y)));   
        end
        %--------------------------------------------------------------

        % Move the paddle with Accel mapped directly to velocity
        % player 2
        %--------------------------------------------------------------   
        vely2 = -1 * wiimote2.Accel(2) * velDamping;
        [x_p2 y_p2] = getCenter(player2_Paddle);

        if( ((y_p2 + paddleSize_y) + vely2 < 300) && ((y_p2 - paddleSize_y) + vely2 > 0) ) 
            yMove(player2_Paddle, vely2);    
        elseif ( ((y_p2 + paddleSize_y) + vely2 > 300) && ((300 - (y_p2 + paddleSize_y)) > 0) )
            yMove(player2_Paddle, (300 - (y_p2 + paddleSize_y)));   
        elseif ( ((y_p2 - paddleSize_y) + vely2 < 0) && (0 - (y_p2 - paddleSize_y) < 0) )
            yMove(player2_Paddle, (0 - (y_p2 - paddleSize_y)));   
        end
        %--------------------------------------------------------------


        % Move the ball
        %---------------------------------------------------------------
        [x_ball y_ball] = getCenter(ball);

        % if it is against the upper or lower wall switch its ydir
        if( ((y_ball + ballSize) > 300) || ((y_ball - ballSize) < 0) )
            ydir = -1 * ydir;
        end

        % If the ball is behind player 1's line
        if( ((x_ball + ballSize) > 290) )
            if( ((y_ball - ballSize) < y_p2 + paddleSize_y) ...
                    && ((y_ball + ballSize) > y_p2 - paddleSize_y) )
                
                xdir = -1 * xdir;
                
                ydir = vely2 * (.5 * velDamping);                
                
            else
                p1_score = p1_score + 1;
                set(p1_score_disp, 'string', p1_score);
                needNewBall = true;
            end       
        % If the ball is behind player 2's line
        elseif( ((x_ball - ballSize) < 10) )
            if( ((y_ball - ballSize) < y_p1 + paddleSize_y) ...
                    && ((y_ball + ballSize) > y_p1 - paddleSize_y) )
                
                xdir = -1 * xdir;
                
                ydir = vely1 * (.5 * velDamping);                 
                
            else
                p2_score = p2_score + 1;
                set(p2_score_disp, 'string', p2_score);
                needNewBall = true;
            end
        end


        % Actually move the ball
        xMove(ball, xdir);
        yMove(ball, ydir);
        %---------------------------------------------------------------


        % make a new ball if needed
        if(needNewBall)

            % make the new ball
            hide(ball);
            ball = drawRectangle((150 - ballSize), (150 - ballSize), (ballSize * 2), (ballSize * 2), 'white');

            % set a random y dir
            ydir = (rand * 2) - 1; % number between -5 and 5

            % reset the paddles back to the center
            hide(player1_Paddle);
            hide(player2_Paddle);
            player1_Paddle = drawRectangle(5, 135, paddleSize_x * 2, paddleSize_y * 2, 'white');
            player2_Paddle = drawRectangle(290, 135, paddleSize_x * 2, paddleSize_y * 2, 'white');

            needNewBall = false;

            % pause
            pause(1);

        end

        % check if someone has won 
        if (p1_score == 11)
            winner = 1;
            gameover = true;
        elseif (p2_score == 11)
            winner = 2;
            gameover = true;
        end

        % Redraw the screen and pause
        redraw();    
        pause(0.01);

    end % while

else
    
    disp('Not enough wiimotes available to play');
    
end

if(gameover)
    winDisp = writeText(65,100,['Player ' int2str(winner) ' Wins!']);
    set(    winDisp, 'FontWeight', 'bold', ...
            'FontSize', 32, 'FontName', 'OCR A Extended', ...
            'Color', 'red');
end

pause(5);
    
% Disconnect the Wiimote
if(wiimote1.isConnected > 0)
    wiimote1.Disconnect();
end
if(wiimote2.isConnected > 0)
    wiimote2.Disconnect();
end

-- JordanBrindza - 02 Jul 2008